The machine meets the requirements of GMP. It is widely used for the powder granule materials of the pharmaceuticals, chemicals, foods, plastics, electronics, alloys etc..  

  

The vessel of the machine adopts carbonsteel+glass coating, under the state of vacuum, heat by putting  thermo water or steam into the jacket, the quantity of heat of inside wall contacts with the wet materials, and the materials continuously tumble with the vessel’s rotating. After absorbing and vaporization, the vapor moisture after vaporization were continuously taken out of the vessel by vacuum pump, thus speed up the drying speed, and with the materials continuously tumbling, the materials were evenly and completely dried and mixed.

 

Characteristics and uses:
1. Machine that adopts the design of 4-directions vacuuming filtering head, materials will be absolutely not contaminated by the second contamination up to the requirements of GMP.

2. Suitable for raw materials that cannot bear high temperature, and is easy oxidized (such as heat sensitive, oxygen-hating materials.)

3. The Volatile materials discharged when drying should be recovered (such as the recovery of expensive solvents, the collection of  poisonous gas.)

4. Finished products that requires evenly dried and contains very low moisture 

5．Material that has strict requirement to the limit of the metal ion content when drying (should use glass lined vessel to absolutely avoid material contacting with metal wall.)

6. Material that has strict requirement to the crystallizing shape.   

 

Working pressure: Inside vessel-0.09Mpa

Working temperature: Inside vessel less than 120 degree C.

Loading coefficient: Less than 60%( capacity)

Jacket: Less than 0.1Mpa

Jacket: Less than 118 degree C.

Rotary Speed: 4-5rpm/min. ( 1-10rpm/min.adjustable speed available for special requirement.)

 

Specification: